Application fields of ultrasonic induction heating equipment: heat treatment, forging, rolling, brazing (suitable for all walks of life of welding), heating industry, etc.
Special attention shall be paid to the operating specifications in the daily operation of the audio heating equipment:
(1) There must be more than two persons to operate the ultrasonic heating equipment, and the person in charge of operation shall be designated. Wear insulating shoes, insulating gloves and other specified protective articles.
(2) The operator must be familiar with the operating procedures of high-frequency equipment. Before starting the machine, check whether the cooling system of audio heating equipment is normal. Power can be transmitted only after it is normal, and operate in strict accordance with the operating procedures.
(3) All doors of the audio heating equipment shall be closed before operation, and the doors shall be equipped with electrical interlocking devices to ensure that power cannot be transmitted before the doors are closed. After the high voltage is closed, do not move behind the machine at will, and do not open the door.
(4) Burr, scrap iron and greasy dirt shall be removed from the workpiece of ultrasonic heating equipment, otherwise it is easy to strike an arc with the inductor during heating. The arc light generated by arc striking will not only damage vision, but also easily damage sensors and equipment.
(5) The audio frequency heating equipment shall be kept clean, dry and dust-free. In case of any abnormality during work, first cut off the high-voltage power, and then check and eliminate the fault. Special personnel must be assigned to repair the high-frequency equipment. After opening the door, first discharge the anode, grid and capacitor with an electric rod, and then start the maintenance. It is strictly prohibited to carry out live repair.
(6) When using ultrasonic heating equipment, the safety regulations on electrical, mechanical and hydraulic transmission shall be observed. Prevent toppling when moving the quenching machine.