GuangYuan · GuangZhiYuan Technology Sensor's Life
1.GuangYuan · GuangZhiYuan technology correctly installed
(1) Contact plate or contact flange, whether it is bolt, cam, hydraulic pressure, must close to the output of the quenching transformer, the two contact surfaces are cleaned, no oxidative skin, 60% or more area should be good.
(2) The gap between the effective circle and the workpiece must reach the specified value to avoid short-circuit, burns, etc. Therefore, the effective circle axis and the workpiece axis are as concentric, the relevant positioning block, the board and the workpiece must remain parallel or vertically.
2. The workpiece of the quenching should comply with the workpiece size and cleanliness require the workpiece quenching surface to be residual strap; the size of the workpiece quenching surface must meet the steps, otherwise the inductor will .
3. Timely cleaning, wipe the clean and effective circle work surface, especially the magnetians, the magnet can be adsorbed, and there is a hard shell with oil adhesion.
4. Regularly check the regular inspection of the active ring size mold, and the extraction is timely correction.
5. The active circle of the current should be periodically checked for a water temperature and the water temperature cannot exceed 70 ° C, and the temperature rise is less than 25 ° C.
GuangYuan · GuangZhiYuan Source Technology Sensance has a lot of hundreds of hundreds of thousands of times. Roller sensor, the roller scanning sensor is shorter than each load time, and its life is shorter; the quenching sensor of the CVJ part is shorter, and its life is very long, with hundreds of thousands of times.
In order to detect the life of the sensor, there is now an independent sensor cycle counter supply market. It is installed on the sensor, each energizes, it can count and store data, display the sense of sensor, such as 50,000 or 200,000 times.