Welcome to GuangYuan · GuangZhiYuan Technology! Contact number: 0769-22780950
中文 | English | Online message | Contact us
-
Consultation hotline
0769-22780950
Tell：0769-22780950
Fax：0769-22780951
E-MAIL：gybp@263.net
Add：No. 2, Xiheng 2nd Road, Bajiaowo Industrial Zone, Wanjiang
District, Dongguan City, Guangdong Province,China.
Common problem
What kinds of methods do you have induction quenching?
Source： Time：2021-05-11 15:55:56 views：
The main purpose of the induction quenching worker temper is to reduce quenching stress to avoid quenching cracks; sometimes, the tempering is to reduce the hardness of the workpiece technical requirements.
The workpiece induces the temper after quenching, and there are generally three ways:
The main purpose of the induction quenching worker temper is to reduce quenching stress to avoid quenching cracks; sometimes, the tempering is to reduce the hardness of the workpiece technical requirements.
The workpiece induces the temper after quenching, and there are generally three ways:
1. When the fireworks are quenched, the cooling does not perform in advance, so that the residual heat of the center of the center of the hardened layer is transferred to the hardening layer, thereby rearing the hardening layer again, reaches a certain tempering temperature, so that The hardening layer obtains the required tissue and performance.
2. Induction tempering uses the original quenching heating power supply, under the original sensor equipment, and reducing the power method for induction tempering.
The workpiece induces the temper after quenching, and there are generally three ways:
1. When the fireworks are quenched, the cooling does not perform in advance, so that the residual heat of the center of the center of the hardened layer is transferred to the hardening layer, thereby rearing the hardening layer again, reaches a certain tempering temperature, so that The hardening layer obtains the required tissue and performance.
2. Induction tempering uses the original quenching heating power supply, under the original sensor equipment, and reducing the power method for induction tempering.
Related News
More>>- What are the heat treatment equip... 2022-07-21
- Use and maintenance of quenching ... 2021-12-02
- How much is the new induction hea... 2021-09-17
- What are the induction heating eq... 2021-09-13
- What are the components of induct... 2021-08-27
- What aspects are medium frequency... 2021-08-23
- How to choose high frequency indu... 2021-07-30
- Which is a good induction heating... 2021-07-28
- What do you know about induction ... 2021-07-22
- Do you know how to choose an indu... 2021-07-20
- Tell
- 0769-22780950
DongGuan GuangZhiYuan Electronics Technology Co.,Limited | Guang Yuan Technology(HK) Electronics Co.,Limited | DongGuan WanJiang GuangYuan Inverter Electronic Equipment Factory
National consultation hotline：0769-22780950 E-MAIL：gybp@263.net
Add：No. 2, Xiheng 2nd Road, Bajiaowo Industrial Zone, Wanjiang
District, Dongguan City, Guangdong Province,China.
粤ICP备16082297号-1 网站地图 网站地图 技术支持：品尚网络
*本站相关网页素材及相关资源均来源互联网，如有侵权请速告知，我们将会在24小时内删除*
