12 advantages of induction heating equipment：

1. The fastest heating speed is less than 1 second (speed is adjustable);
2. Heat widely heated a wide variety of metal workpieces (replace the detachable sensing circle depending on the working switch);
3. The installation is convenient to connect the power supply, the sensing ring and the inlet and outlet pipe are used; the size is small, the weight is light;
4. Operate a few minutes to learn;
5. Start the quick-venting power-on to start heating;
6. The power consumption is less than 70% of the old-fashioned high-frequency equipment, the smaller the workpiece, the less power consumption;
7. The effect is good to heat very uniform (can pass the smell of the inductance, so that the workpiece is obtained, the temperature is fast, the oxide layer is small, there is no waste after annealing;
8. Protection has a alarm indication such as overwhelming, overcurrent, overheating, and lack of water, and automatically controls and protects;
9. Temperature controllable by setting the heating time to control the temperature of the workpiece heating, so that the heating temperature is controlled to a technical point;
10. Full load design is 100% full load design for 24 hours.
11. Small size, light weight, only dozens of kilograms, small area, saving plant space work environment is good, energy saving, safe, no noise exhaust gas dust is discharged.
12. Eliminate high pressure from a boost transformer that produces nearly 10,000 volts, high security.